Wednesday, June 11

Today, I started by configuring NAT rules for a firewall that uses a VPN tunnel to remote sites, specifically for the firewall rules I set up last week. Then I attended a meeting discussing meters throughout the campus, mainly focusing on sharing thoughts and concerns about the ongoing construction. Then, to finish the day, we were figuring out which ports on a switch were hot, cold, and had nothing plugged into them. After determining these, we went to every cold port and verified that nothing was plugged into that jack, and if that was the case, we are going to pull it from the switch. Did ran into an issue, which was that some jack wall plates were mislabeled. This took a while to figure out, but it was figured out nonetheless.

Comments

Post a Comment

Popular posts from this blog

Friday, April 18

Today was a slow day. I ended up doing two classroom calls, one of which had a speaker issue, which was not being able to hear audio out of the speaker. To fix this, I noticed the Extron was stuck in a reboot, so I unplugged it and plugged it back in then it appeared to work like normal. The next classroom call was an Elmo video display issue, for which the fix was to replace the VGA cord, and it worked after this. Then the rest of the day I spent imaging laptops and organizing the tech workroom.
Read more

Wednesday, April 23

Today, I started by joining a walk around campus with an HVAC worker, an electrical worker, someone from maintenance, and the network admin I am interning with. The point of the walk around was to identify access for electrical and network wires for meters that will go into the boiler rooms all around the campus. Then, for the rest of the day, I was inputting more phone info about the VoIP system for the E911 system that will be implemented later. Still have to work out a few of the mystery phones in the Excel spreadsheet by tracking them down, but I inputted every VoIP phone from every building on campus in this Excel sheet, and the new names for the interfaces on the switches are based on the room they are found in.
Read more

Week 1 Reflection

This first week interning felt like jumping straight into it, which is normal but still comes as a bit of a shock to the system. With my time working in IT in general, it seems to be a very team-focused profession. For example, the network admin and I got stuck on how to properly configure VLANs and how to give access to said VLANs on the switches, because they were all Aruba switches and not HP, which is what he is used to. But thank goodness for online forums, resources, and working as a team. What I learned this week about how my employer manages their IT resources is that they use a lot of segmentation, and how it can keep certain responsibilities and access to resources depending on where an end user's machine is placed in a VLAN/ subnet. For example, a podium PC shouldn't have access to printing, and a faculty's personal machine is allowed to print, which is due to network segmentation of the device.
Read more